Budenberg M24 Bellows Type Differential Pressure Gauge

Product Description

The Budenberg M24 Bellows Type Differential Pressure Gauge has been designed for applications which require the measurement of low differential pressures whilst accommodating very high static pressures. Designed around a balanced bellows system, which converts the differential pressure into a rotary movement by way of a torsion tube assembly and mechanical linkages. The entire assembly is liquid filled, producing a hydraulic self lubricating measurement system which allows for full line pressure to be applied to either side of the unit without damage to the device. Instruments are available in a range of differential ranges and static pressures and can be manufactured in a wide variety of materials, connection sizes and installation options. We have an interesting article relating to Pressure Gauge Selection in the Technical section on this website.

Designed and manufactured in the UK.

Sizes: M24-2 = 100mm (4") / M24-6 = 150mm (6").
Mounting: Direct. Surface Mounting via a stainless steel wall bracket or a standard 2" pipe Yoke mount with 'U' Bolts. Panel Mount via a special stainless steel bracket.
Construction: 316 Stainless Steel. White anodised Aluminium dial with single or dual scale. Micro Adjustable Knife Edge Pointer. Laminated Safety Glass. IP66 rating.
Pressure Element: Brass / Bronze 75 mBar to 7.6 Bar differential pressure. 316 Stainless Steel 150 mBar to 27.5 Bar differential pressure. Inconel / St St 150 mBar to 69 Bar differential pressure. Option: Other bellows materials are available, including Hastelloy.
Scale Ranges: 0 to 75 mBar up to 70 Bar. Equivalent units of pressure / vacuum available. Single and dual scales available. Option: Zero based, elevated zero, suppressed zero calibrations.
Overload Protection: Maximum line pressure to either side of the unit and up to 750 Barg static pressure.
Connections: 1/2" x 1/2" BSP (P) Female, 1/2" x 1/2" NPT Female. The process connections are duplicated on the top and bottom of the differential cell to facilitate gas or liquid measurement connection and venting.
Accuracy: ±0.75% FSD on ranges up to 1 Bar differential, ±1.00% FSD on ranges from 1 to 30 Bar differential, ±1.50% FSD on ranges from 31 to 69 Bar differential.
Temperature: -40 to +200 degC.
Certification: Instruments will maintain their original calibration for over 100,000 cycles. Certificate of Conformity. Material Certification (option). Point by Point Test Certificate (option).
Notes: Manufactured to comply with EN837-1 and other regulatory standards including PED.

If you need any help please use our online chat below, ring us on 01482 601030 or email sales@flowstar.co.uk