Valpres figure 703000 Stainless Steel 2 piece ISO direct mount full bore ball valve. With a Stainless Steel ball and stem, P.T.F.E. seats and P.T.F.E. / FKM seals. Fitted with an antistatic stem. ATEX II 2 GD (Zones 1 and 21) approved. End connections screwed BSP female.
Valbia 85 series ISO direct mount quarter turn electric actuator. With a Techno-polymer housing. IP67 protection. With manual override and visual position indication. 2 x limit switches fitted for remote open and closed position indication. With an electronic torque limiter. With an internal anti-condensation heater. With PG11 electrical connections.
All assembled (Direct Mount) and function tested.
Size range: 1” to 3”
Valve Options: The valves are available with a V ball for flow control.
Operating Voltages: 12 Volt AC/DC - 24 Volt AC/DC – 110/240 Volt AC
Actuator options: On/Off (Fail fixed), On/Off with Battery back Up (Fail Close or Fail Open), Positioner 4 to 20 mA and 0 to 10 Volt DC signal, Battery Back Up and Positioner (as detailed above).
Valbia 86 series actuator with an Aluminium enclosure (all options as above).
Valpres stainless ball valve with Valbia electric actuator datasheet
If you need any help please use our online chat below, ring us on 01482 601030 or email sales@flowstar.co.uk