Chrome-plated forged brass, dual stage regulator for low delivery pressure applications
The CONCOA 213 Series regulator provides primary pressure control of
non-corrosive, liquefied, or high purity inert gas applications (up to
grade 4.5) requiring constant low-pressure control. Two stages of
pressure regulation minimize any pressure variation arising from inlet
pressure changes, such as the depletion of the supply cylinder, allowing
the 213 Series regulator to provide a constant delivery pressure. With
delivery pressures as low as 0.1 PSIG (7 mBAR) that can be adjusted in
as low as 0.05 PSIG (4 mBAR ) increments, the CONCOA 213 Series
regulator satisfies any high purity application with atmospheric
delivery pressure requirements below 5 PSIG (350 mBAR).
Features
- Fine adjusting screw thread allows precise pressure adjustment
- 316L stainless steel diaphragm prevents inboard diffusion
- CAPSULE® seat design features integral 360° filtration in both stages
- Standard relief valve protects diaphragm and gauges
- Spectrometric helium leak check verifies leak integrity
Specification
- Max inlet pressure (bare body): 3000 PSIG (210 BAR); 4500 PSIG (310 BAR) optional
- Body: Chrome-plated forged brass
- Bonnet: Chrome-plated, die-cast zinc
- Filter: 10-micron sintered bronze
- Diaphragm: 316L stainless steel
- Internal seals: PTFE
- Temperature range: -40°F to 140°F (-40°C to 60°C)
- Cv: 0.02
- Helium leak integrity: 1 x 10⁻⁸ scc/sec
- Gauges: 2 1/2 in (63 mm) diameter steel with brass connection (outlet) and 2 1/2 in (68 mm) diameter plated case (inlet)
- Seats: PCTFE (first stage); PTFE (second stage)
- Ports (bare body): 1/4 in FNPT
- Conformances: Cleanliness meets or exceeds CGA G-4.1; PED 2014/68/EU; ANSI/ASME B40.1; CRN OH5216