Six-port, dual stage, SilcoNert® 2000 treated cylinder regulator for reactive analytical applications
The CONCOA 430 Series SilcoNert® 2000 treated regulator provides primary
pressure regulation of reactive or corrosive calibration mixtures or
pure gases in applications requiring an extremely inert wetted finish
and stable delivery pressure regardless of inlet pressure. The
proprietary, non-reactive amorphous Silicon CVD finish provides
excellent inertness for reactive calibration standards and significantly
more corrosion resistance than bare 316L stainless steel or other more
expensive alloys. With available options installed at the factory, the
430 Series SilcoNert treated regulator may be configured as a single
station manifold with or without purge, low-pressure alarm, or multiple
inlets.
Features
- Metal-to-metal diaphragm seal prevents gas contamination
- CAPSULE® seat design features integral 360° filtration
- Front and rear panel mountable permits easy installation
- Spectrometric helium leak check verifies leak integrity
- Cleanroom assembly eliminates contamination at installation
- Captured vent capable bonnet prohibits exposure in the unlikely event of diaphragm failure
Specification
- Max inlet pressure (bare body): 3000 PSIG (210 BAR); 4500 PSIG (310 BAR) optional
- Body: SilcoNert 2000
- Bonnet: SilcoNert 2000
- Gauges: 2 in (50 mm) diameter stainless steel (bourdon tube not SilcoNert 2000)
- Seat: PCTFE (first stage); PTFE (second stage)
- Filter: SilcoNert 2000 10-micron stainless steel mesh
- Temperature range: -40°F to 140°F (-40°C to 60°C)
- Diaphragm: SilcoNert 2000
- Cv: 0.1
- Helium leak integrity: 1 x 10⁻⁹ scc/sec
- Internal seals: PTFE
- Ports (bare body): 1/4 in FNPT
- Conformances: Cleanliness meets or exceeds CGA G-4.1; PED 2014/68/EU; ANSI/ASME B40.1; CRN OH5216